Ask questions and find out the latest developments at Blata here.
This tutorial is about replacing your o rings for any kind of blata / blata replica engined minimoto motor. 1. remove the motor out of the bike and take off the cylnder, so it looks like this http://www.mmchosting.co.uk/mmcupload/14637/1191301580.jpg 2. Remove the 6 screws holding the...
I installed the floating front brake disk on my B1 with lots of problems.The instructions make it out to be quite simple. Anyone else put this kit on and have problems or no problems??
Hi folks, as in the thread title, I'm looking for an Elite exhaust for my latest project / bodge. Using up lots of spare parts that have been cluttering up my garage by putting my spare Elite engine into a Banshee frame which I was given some time ago. Getting the engine to fit without the chain...
hi all had some bikes on the dyno friday just thought some of u would like to see the difference between the blata and grc .right first we did the grc proddy 3 port new rebuild completely std as were al of the bikes grc 10 bhp at 12600 revs and 4.29 ft/ib at 11750. then we put my wrs on blata...
I've just picked up a pair of blata 2.5's, one for me (14 stone) & one for me laddo (about 4 stone). Needless to say, he is well impressed & blasts off at a goodly rate of knots, but I suffer from rubbish acceleration from setting off, plus bogging down like nobodys business after a slow corner....
After installing an air filter on a blata 3.4 it cuts out on full throttle, it also seems to have a flat spot early on. Ive tried to adjust with the screw but it dont make much differance. Any clues what to try next. It is i quess running the standard jet (52or58) so would it be fuel starvation.
Ive finished all i want (for now) and am happy with the bike, after a few damp sessions its filthy tho. How do i go about cleaning it up, any recomended methods or products, i dont really want to be stripping it all down tho. also i need a stand i brought one and some1 has misplaced it so im...
After lending my bike to a mate he's some how lost the origional filter (black box). So, as he is paying for a new one what k&N filter is best for a straight replacement. I belive its 58-60mm inlet and as there are no holes etc a stack is not needed. Loads on ebay for Ģ10ish, its a fun toy not...
this is some pick of my bms seat unit fited to the elite http://i236.photobucket.com/albums/ff286/glittergixer/SL270727.jpghttp://i236.photobucket.com/albums/ff286/glittergixer/SL270728.jpghttp://i236.photobucket.com/albums/ff286/glittergixer/SL270729.jpg
had my nps vid yesterday i look good on my blata ...might have a nother go this year is any one planing on buying a ultima and racing it :yes::yes::yes:
yes it can rode my blata 4.2 elite in the air cooled class at the nps and got pole won 2 races and 2nd in the 3rd but got 1st in class so they are competive so why are there not more peopl rideing them you can pick one up for Ģ300 ish...
just got me a wrs rep had to do a bit of work on it but it seems to go any now if they are any good
hi trevor, long time no hear... i just bought a 4.2 elite. i have an idea. i could do with your help/advice if you have a bit of time. willing/needing to pay too. thanks. dean (you sorted my grc rr i got new, then arranged a buyer for it). hope you can remember...
:banana: got my brand new blata 4.2 on the track at hully tonight fook it's quick. :banana: :confused: i noticed that it revs very high while im riding it and when i stop it revs for a while then slows and then cuts out is this normal?
Hi guys, I have a 27cc buzzboard, and I'd like to change the engine to something bigger and better. I've looked at the blata 2.4 engine, but I was thinking more along the lines of a blata 4.2 or a polini a/c 4.2. What do these engines sell for? Does anyone have one for sale? If anyone...
Hey all :) Just picked up a dirt cheep little blata, only prob is it has no engine! lol ive no idea what engine it needs or where 2pick 1up? im guessing ebay?? Its a kawazaki ninja miniture i think, everything else is there and working(brakes etc) Is there any way of telling what engine was...
hi what are the best performance parts for a blata elite thanks
Hi, let me know if anyones selling B1 Fairings or any other parts! I'm new to this sport and have brought a second hand bike which is a bit Tatty! Any help will be appreciated! Cheers Taylor
im looking for new fairings :yes: ty
Hi all im new here. Does anyone know what needle and number on my Blata 19mm dellorto should be? It doesnīt run very well and itīs a used carb that i bought. It says M6 on mine.. Best regards FiReSmoke
i have a load of spares that need to go Pair of wheels Exhaust Fairing complete (916 yellow ) 17.5 carb with quick action Brakes front rear Forks with clamps Rad with hoses Frame Pm me if your intrested
Well just got back after an exhausting 2 day trip locked away in the Blata dyno testing room. The special tuned 40cc B1 engine as tuned by Scotty Finlay was dynoed and to the Factory's surprise, was more powerful than their top race engine, power was up by 6% and the torque up by 12% to 15%...
Well nearly anyway, at last my 50cc B1 ( I call it the B2) has been put together again and run on an indoor track. After a few jet changes it was run at Hullavington track and the first impressions are quite good. The compression is a little low but I think thats because I cut too much out of the...
Custom made Gator brake mounts for Blata WRS and B1 Hey down under (denmark) :-) We have been looking for hydraulic brakes for our Blatas (B1 and Elite 15 WRS). It was impossible to find anything plug and play. They all needed a custom made bracket. Only right thing to do? - Buy a caliper (we...
just been having a mess with my 4.2 well now its a bzm proddy engine in it pics to follow :laughs::laughs::D:D;);):p:p
just made a few of these trying to save as much as poss http://i236.photobucket.com/albums/ff286/glittergixer/SL270483.jpg
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
